Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHEET , METAL
Definition:
A FERROUS OR NONFERROUS PRODUCT WITH CROSS-SECTIONAL DIMENSIONS LIMITED TO THOSE ESTABLISHED IN APPENDIX C, FIIG A131. INCLUDES CORRUGATED AND PERFORATED ITEMS. FOR ITEMS 0.005 INCH OR .125MM THICK AND LESS. SEE FOIL, METAL. FOR SILVER ITEMS SEE SILVER SHEET.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
PLATE, SHEET, STRIP, AND FOIL; N
Inclusions:
INCLUDES LEAF; PERFORATED SHEET AND STRIPS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | NOT RATED |
| MATL | MATERIAL | ALUMINUM ALLOY 5052, ASTM B209, TEMPER H32 |
| AGAV | END ITEM IDENTIFICATION | REDUCER, LCL HEAT EXCHANGERS; ASDS |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | COVER, OUTER |
| ABRY | LENGTH | 22.940 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | LEFT/SHORT SIDE IS CUTOUT FROM POINT 3.39 IN. FROM TOP ON A SLANT TO POINT 10.96 DOWN AND 5.50 FROM LEFT EDGE, THEN STRAIGHT DOWN TO BOTTOM EDGE; RIGHT SIDE HAS SIMILAR CUTOUT FROM 3.39 DOWN TO POINT 10.96 DOWN AND 5.50 FROM RIGHT EDGE, THEN STRAIGHT TO BOTTOM; COVER BENDS UP AT 4.7 DEG. ANGLE, 3.41 IN. FROM TOP EDGE AND BENDS DOWN AGAIN, AT SAME ANGLE, 10.98 FROM TOP EDGE; THERE ARE 18 HOLES, 0.096-0.101, DRILLED THRU, 4 EACH IN TOP AND BOTTOM RECTANGULAR AREAS AND 5 ON EACH SLANTED EDGE; THERE ARE ALSO 4 HOLES, 0.248-0.255 CENTERED 0.375 IN. FROM TOP EDGE AND 3.408, 8.784, 14.160 AND 19.536 IN. FROM LEFT EDGE - SEE DRAWING FOR LOCATION OF OTHER HOLES |
| CQHQ | MINIMUM YIELD STRENGTH | NOT RATED |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.0600 INCHES NOMINAL |
| AARN | FABRICATION METHOD | ANY ACCEPTABLE |
| AGTA | BASIC SHAPE STYLE | SOLID |
| HEAT | HEAT TREATMENT | H-32 STRAIN HARDENED |
| ABGL | WIDTH | 12.500 INCHES NOMINAL |